  Your first line of defense against swirls, dullness and water spots.
Correct paint problems without creating new ones. That’s the promise of Pinnacle XMT Ultra Fine Swirl Remover.
Clear coats are unbelievably thin. Typically, it’s about the thickness of 2 layers of cellophane wrap. That’s approximately 1.5 to 2 mils thick or .015 to .02 inches. Needless to say, you don’t want to do any unnecessary compounding to remove the lightest paint flaws. Smooth over minor imperfections with Pinnacle XMT Ultra Fine Swirl Remover.
Fine swirls and haze can begin appearing within months of driving your new vehicle home from the dealership. That’s when your new car becomes just your car. Hold onto new with Pinnacle XMT Ultra Fine Swirl Remover.
This polish is made with such small abrasives that you can’t see them with the naked eye. Millions and millions of these abrasives fill each bottle of Pinnacle XMT Ultra Fine Swirl Remover. The sheer number and minute size of the abrasive particles blend away fine flaws in the clear coat without leaving any trace of surface marring or haze. Just like a fine jeweler’s rouge, XMT’s Concentrated Micro Abrasives leave the paint finish glossy and smooth, just like new.
Applied with a dual action or rotary polisher, Pinnacle XMT Ultra Fine Swirl Remover provides just the right balance of abrasive action and conditioning oils to blend away the first signs of aging. D.A. polishers produce less heat than rotary machines, making them a perfect choice for correcting minor paint defects.
All XMT Series products were formulated in sunny South Florida, the home of Pinnacle Natural Brilliance. Intense heat and humidity are constant challenges here. That’s why all XMT products were created to work as promised in the sun or shade.
 Pinnacle is dedicated to preserving your vehicle and the environment. Pinnacle XMT Ultra Fine Swirl Remover is VOC compliant, body shop safe, clear coat safe, and silicone-free.
Pinnacle XMT Ultra Fine Swirl Remover can be applied with a polishing pad or a finishing pad. The polishing pad will provide a very light cut to aid the swirl remover in smoothing out rough paint. Pour a quarter-size amount of polish onto the pad and set the polisher at a maximum speed of 5000 OPM. Work the polish in until it starts to dry or disappear. Turn the polisher off the buff the paint with a Cobra microfiber towel. XMT Ultra Fine Swirl Remover has no fillers so you can see the real results of your work immediately. Follow up with Pinnacle Signature Series II or your favorite Pinnacle wax.
If your new or like-new vehicle is starting to show signs of age, turn back the clock with Pinnacle XMT Ultra Fine Swirl Remover. It’s the first step in maintaining your vehicle’s shine over its lifetime.
12oz.
|
|
