  Maintain smooth, healthy paint with XMT’s paint-friendly swirl removers.
Think of Pinnacle XMT Series as a collection of anti-aging products for your vehicle. Your vehicle starts to age even as it sits on the car lot, but proper care can maintain a healthy finish over its lifetime. XMT gives you the tools to do just that in the Pinnacle XMT Light Swirl Remover Kit.
This kit is designed for the maintenance of new or like-new paint finishes. The products in the XMT Light Swirl Remover Complete Kit remove the first signs of aging – such as mild to moderate swirls, mild scratches, and light hazing – to maintain the crisp, reflective finish. And XMT swirl removers are gentle. You’re not endangering your paint finish with harsh compounds when you polish with XMT.
XMT swirl removers combine unique emollients and Concentrated Micro Abrasives to blend away imperfections while nourishing the paint finish. Used with a dual action polisher, like the Porter Cable 7424XP, the XMT Light Swirl Remover Complete Kit rejuvenates and preserves your paint finish.
The XMT Light Swirl Remover Complete Kit includes:
12 oz. XMT Fine Swirl Remover #2
12 oz. XMT Ultra Fine Swirl Remover #1
12 oz. Carnauba Finishing Glaze
6.5 inch CCS Orange Light Cutting Pad
6.5 inch CCS White Polishing Pad
6.5 inch CCS Gray Finishing Pads
2- 16 x 16 inch Cobra Microfiber Towels
12 oz. XMT Polishing Pad Conditioner
Polish ‘N Wax Applicator
12 oz. XMT Fine Swirl Remover #2
Pinnacle XMT Fine Swirl Remover is a blend of mild abrasives and lubricating oils that remove light to moderate imperfections on aging paint finishes. If your vehicle is not new but has no severe paint damage, this is the swirl remover for you. It removes light to moderate imperfections like swirls, mild scratches, and light oxidation without reducing surface gloss. You will not need a finishing polish.
12 oz. XMT Ultra Fine Swirl Remover #1
This polish is made with such small abrasives that you can’t see them with the naked eye. The sheer number and minute size of the abrasive particles blend away fine flaws in the clear coat without leaving any trace of surface marring or haze. Just like a fine jeweler’s rouge, XMT’s Concentrated Micro Abrasives leave the paint finish glossy and smooth, just like new. XMT Ultra Fine Swirl Remover is for like-new paint that is just starting to show signs of age. It can also be used as a finishing polish.
12 oz. XMT Carnauba Finishing Glaze
The gentle cleaners blend away minor flaws - like spider webbing, micro-marring, and overall dullness – to increase depth and clarity. At the same time, a layer of carnauba bonds to the paint surface to further enhance the dynamic shine created by the glaze. What can’t be removed with the cleaners is filled in with carnauba to create a smooth, flawless finish. It’s perfection and protection in one! Use XMT Carnauba Finishing Glaze as the finale to your detailing process. To increase depth and brilliance, top the glaze with Pinnacle Signature Series II or Souveran wax.
6.5 inch CCS Orange Light Cutting Pad
Pair the orange pad with XMT Fine Swirl Remover. The high density foam blends away mild to moderate paint imperfections, such as swirls, scratches, and oxidation. This is Lake Country’s most popular foam pad.
6.5 inch CCS White Polishing Pad
Apply XMT Ultra Fine Swirl Remover with this white foam. The pad has a very mild cut in order to remove light defects from the paint. This is a very versatile pad as it can be used to apply pre-wax cleaners, finishing polishes, and light swirl removers.
 6.5 inch CCS Gray Finishing Pad
Apply XMT Carnauba Finishing Glaze with a gray foam pad. The pad is made of very soft, absorbent foam that prevents dripping and smearing as you apply glazes and last step products. Use the second gray pad to apply a wax of your choice to deepen the shine created by the finishing glaze.
2 Cobra Microfiber Towels (16 x 16 inches)
The Cobra Microfiber Towel is spun from an 80/20 polyester/polyamide blend, producing a highly refined microfiber. The microscopic polyester/polyamide fibers are split with a unique process that creates a “feathered” weave on one side for buffing and looped fibers on the other side, which are excellent for cleaning. This superior “feather” weave results in far greater absorption properties in a virtually lint free network of fibers.
12 oz. Pinnacle XMT Polishing Foam Pad Conditioner
Prevention of dry buffing is as easy as misting an unused pad with Pinnacle XMT Polishing Pad Conditioner. It only takes a couple of spritzes to prep the pad for polishing. The rich lubricants instantly penetrate the pad, softening and conditioning the material. Even if the pad has never been used, it will glide across the paint like you’re halfway through the detail session.
Polish ‘N Wax Applicator
This two-sided applicator is an excellent tool for cutting in close around trim and mirrors, places that your polisher can’t go. The foam applicator has gray finishing foam on one side and orange light cutting foam on the other. This is two applicators in one!
All pads included in the XMT Light Swirl Remover Kit have hook & loop backing, which attaches securely to a 5 or 6 inch hook & loop backing plate. The 6.5 inch pads in this kit are intended for a dual action polisher, such as the Porter Cable 7424XP.
Use the products as follows:
- Start by misting the orange pad with Pinnacle XMT Polishing Pad Conditioner. On significant swirls and flaws, apply XMT Fine Swirl Remover #2 with the orange pad. If damage is concentrated in particular areas, like the hood and roof, you may only need to apply this product on problem areas. Buff off residue after each section using a Cobra microfiber towel or bonnet.
- Apply XMT Ultra Fine Swirl Remover #1 with the white polishing pad. You can do an all-over polish to remove the lightest imperfections and improve surface gloss with this gentle swirl remover. Buff off residue after each section.
- Your paint should be in great shape at this point. Apply XMT Carnauba Finishing Glaze with one of the gray foam pads. Buff off the residue as you complete each section.
- Your vehicle will be glossy and reflective after applying the glaze. For the deepest shine and longer-lasting protection, use the second gray pad to apply your favorite wax. We recommend Pinnacle Signature Series II Carnauba Paste Wax for a fantastic reflection on any color.
- Clean each pad after use with Pinnacle XMT Polishing Pad Cleaner. Spray each pad generously with the cleaner and toss them in a bucket of clean water. Agitate with a Foam Conditioning Brush if necessary. Rinse well and let air dry.
Address mild swirls and blemishes before they become significant problems. The Pinnacle XMT Light Swirl Remover Complete Kit removes the first signs of aging from your vehicle’s paint finish and leaves a bright, smooth gloss. By addressing flaws early and protecting your vehicle from the beginning, you can maintain the youthful appearance of your vehicle over its lifetime.
See what XMT Series can do to preserve your vehicle with the Pinnacle XMT Light Swirl Remover Complete Kit.
Purchased separately, these products have a total retail value of $115.95. SAVE $26.00!
|
|
