| || |
|32 oz. XMT Heavy Duty Swirl Remover #4 Polishing Compound|
Restore rough, oxidized paint with XMT’s only true compound.
XMT Heavy Duty Swirl Remover #4 is a true polishing compound with a high concentration of heavy grade abrasives. Concentrated abrasives increase the compound’s cutting power with minimal increase in compound haze. XMT Heavy Duty Swirl Remover eliminates your vehicle’s worst flaws to begin to restore the depth of color and gloss to even the most neglected paint finishes.
XMT Heavy Duty Swirl Remover #4 is a true compound. It eliminates oxidation, severe swirls and scratches with a blend of abrasives, cleaners, and lubricating oils. The cleaners help remove dead, oxidized paint while the abrasives level scratches and severe swirls. The oils help lubricate the abrasive particles to minimize hazing, though some hazing is expected and easily removed.
XMT Heavy Duty Swirl Remover #4 is effective on all kinds of paint, including clear coats. Do not use this product on new or like new paint. We must stress, this is an aggressive compound for severely damaged paint. Always try a less abrasive polish, such as XMT Intermediate Swirl Remover #3, before stepping up to XMT Heavy Duty Swirl Remover #4. XMT #4 is the last hope for rough, oxidized paint.
XMT Heavy Duty Swirl Remover #4 can be applied with a rotary or dual action polisher. Since this has heavier grade abrasives, you may have to work the compound longer to get satisfactory results with a dual action polisher. We recommend using a polishing pad with XMT Swirl Remover #4.
Use XMT Heavy Duty Swirl Remover #4 with a polishing pad. Set the maximum speed of a rotary polisher to 1500 RPM. On a dual action or orbital, like the Porter Cable 7424XP, set the speed at 5000 OPM. Pour approximately a quarter size amount of the swirl remover onto the pad and spread it onto the desired section of paint before turning the polisher on. Turn the polisher on and begin moving the polisher side to side and then up and down. Work slowly to get the maximum results from the swirl remover. When it begins to dry, turn off the polisher and buff away the residue with a soft microfiber towel.
After compounding, use XMT Intermediate Swirl Remover #3 and a light cutting pad to minimize the compound haze. Next, use XMT Ultra Fine Swirl Remover #1 and a polishing pad to completely eliminate any remaining haze and to restore surface gloss.
Call Toll-Free 1-800-215-4460 to speak to a Customer Service Representative or email us