| | | Auto Detailing Supplies > Shop By Brand > Wolfgang Concours-Series Car Care > Wolfgang Finishing Glaze 3.0 8 oz. > Wolfgang Finishing Glaze 3.0 16 oz.
| | Wolfgang Finishing Glaze 3.0 16 oz. |  |  Your detail isn’t finished until you use Wolfgang Finishing Glaze 3.0.
Wolfgang Finishing Glaze 3.0 is a fusion of Wolfgang’s original Finishing Glaze formula and Menzerna’s Nano Polish. Menzerna developed this hybrid formula exclusively for Wolfgang. This unique formula blends away 2500 grit sanding marks yet finishes with the gloss and slickness of a fine machine glaze.
Wolfgang Finishing Glaze 3.0 is gentle enough to use on new OEM paint finishes, yet it is highly effective on hard, ceramic clear coats. The fine, consistently sized abrasives have strength in numbers. The high concentration of microscopic abrasives smooth minor imperfections in ceramic paint and diminish to an ultra fine abrasive dust. Because these abrasives are so small, they will not mar conventional, “softer” clear coats. You’ll get consistently smooth, flawless results every time.
Wolfgang Finishing Glaze 3.0 is a water-based emulsion with ultra fine diminishing abrasives that gently polish the paint to a brilliant gloss. Compounding swirls, mild oxidation, and water spots disappear to reveal glassy smooth, beautiful paint. Underneath a wax or sealant, the paint radiates with energy and gloss. The water-based polish is low-dusting, silicone-free, filler-free, and wax-free.
Wolfgang Finishing Glaze 3.0 can be applied with a polisher or by hand. To remove compounding swirls and mild oxidation, we recommend using a polisher. Apply by hand for shine enhancement. Use Wolfgang Finishing Glaze 3.0 after Wolfgang Total Swirl Remover 3.0 to restore maximum gloss, especially on dark-colored vehicles. Then apply Wolfgang Deep Gloss Paint Sealant or Wolfgang Füzion Estate Wax to protect the newly polished paint.
Wolfgang Finishing Glaze 3.0 combines the shine enhancement of a glaze with the light paint correction of a polish into one ultimate finishing product. You’re not finished polishing until you’ve applied Wolfgang Finishing Glaze 3.0.
16 oz. (437 ml.)
To Apply By Hand:
- Mist the Wolfgang German Polish N Wax Applicator with Wolfgang Instant Detail Spritz to moisten the foam. Apply a quarter size amount of Wolfgang Finishing Glaze 3.0 to the applicator.
- Work in a back and forth, overlapping motion until the area starts to dry. Wipe off the polish with a damp Cobra Microfiber Towel. Work in 2 x 2 sq. ft. sections until the entire vehicle is done.
Note: Applying Wolfgang Finishing Glaze 3.0 by hand will enhance gloss but it will not remove swirls. For paint correction, apply this product with a dual action or rotary (circular) polisher.
To Apply By Machine:
- Clean and dry the vehicle. Apply Wolfgang Finishing Glaze 3.0 out of direct sunlight.
- Use a soft foam finishing pad. Apply a bead of polish to the vehicle. With the polisher turned off, spread the polish over about a 2 x 2 sq. ft. area.
- Polish at 1000-1200 RPM (4 to 4.5 on a dual action polisher) working slowly across and then up and down the area. Check your work after several passes to see if the defects have been removed. If so, reduce the pressure and continue buffing until a high gloss is achieved. If the pad becomes dry, mist it with Wolfgang Instant Detail Spritz and continue buffing.
- Wipe the polished area with a damp microfiber cloth.
- Always apply a wax or sealant after compounding or polishing. Wolfgang Deep Gloss Paint Sealant seals in the shine with its long-lasting polymer formula. Wolfgang Füzion Concours Wax is a blend of carnauba wax and polymers that offers supreme protection with a traditional paste wax feel.
|
|
|
| 
| | Need Assistance?
Call Toll-Free 1-800-215-4460 to speak to a Customer Service Representative or
email us
|
| |
