  Xtreme Machine Technology applied by hand!
Don’t have a polisher? No problem! The products in Pinnacle XMT Series are so advanced and so user-friendly, they will yield impressive results when applied by hand. The combination of Concentrated Micro-Abrasives and emollients allows XMT swirl removers to work effectively without creating the kind of hazing that often results from compounds. The abrasives found in XMT swirl removers are precisely milled to break down to a fine polish, even if your method of application doesn’t produce much heat.
If you prefer the hands-on approach to car care, we invite you to try XMT Series. The Pinnacle XMT Light Swirl Remover Intro Kit is designed to give you everything you need to improve your vehicle’s paint by hand. The products in this kit will remove light swirls, scratches, and mild oxidation. An included applicator makes it easy to achieve the results you want without a polisher.
The Pinnacle XMT Light Swirl Remover Intro Kit includes:
12 oz. XMT Fine Swirl Remover #2
12 oz. XMT Ultra Fine Swirl Remover #1
12 oz. XMT Carnauba Finishing Glaze
Polish ‘N Wax Applicator
2 Cobra Deluxe Orange Microfiber Applicators, 3.5 x 4.5 inches
2 Cobra Microfiber Detailing Cloths, 16" x 16"
Pinnacle XMT Ultra Fine Swirl Remover #1
This polish is made with such small abrasives that you can’t see them with the naked eye. The sheer number and minute size of the abrasive particles blend away fine flaws in the clear coat without leaving any trace of surface marring or haze. Just like a fine jeweler’s rouge, XMT’s Concentrated Micro Abrasives leave the paint finish glossy and smooth, just like new. XMT Ultra Fine Swirl Remover is for like-new paint that is just starting to show signs of age. It can also be used as a finishing polish.
Pinnacle XMT Fine Swirl remover #2
Pinnacle XMT Fine Swirl Remover is a blend of mild abrasives and lubricating oils that remove light to moderate imperfections on aging paint finishes. If your vehicle is not new but has no severe paint damage, this is the swirl remover for you. It removes light to moderate imperfections like swirls, mild scratches, and light oxidation without reducing surface gloss. You will not need a finishing polish.
Pinnacle XMT Carnauba Finishing Glaze
The gentle cleaners blend away minor flaws - like spider webbing, micro-marring, and overall dullness – to increase depth and clarity. At the same time, a layer of carnauba bonds to the paint surface to further enhance the dynamic shine created by the glaze. What can’t be removed with the cleaners is filled in with carnauba to create a smooth, flawless finish. It’s perfection and protection in one! Use XMT Carnauba Finishing Glaze as the finale to your detailing process. To increase depth and brilliance, top the glaze with Pinnacle Signature Series II or Souveran wax.
Polish ‘N Wax Applicator
This two-sided applicator is an excellent tool for cutting in close around trim and mirrors, places that your polisher can’t go. The foam applicator has gray finishing foam on one side and orange light cutting foam on the other. You get two applicators in one!
2 Cobra Deluxe Orange Microfiber Applicators, 3.5 x 4.5 inches
These Cobra Deluxe Orange Microfiber Applicators are great for applying rubber and vinyl dressings, polishes, and cleaners to your vehicle’s most delicate surfaces. With over 200,000 strands of microfiber per square inch, these applicators will glide over paint, plastic, even glass – without scratching.
2 Cobra Microfiber Detailing Cloths, 16 x 16 inches
The Cobra Microfiber Detailing Towel is manufactured with split weave construction. This means that the polyester and polyamide fibers are split, resulting in a criss-crossing effect that makes the cloth thicker than a flat weave cloth. The split weave also allows space for moisture and contaminants to accumulate so they do not remain on your vehicle’s surface. The split construction also produces millions of microscopic loops of fiber that scrub and polish as you clean. As you move the entire cloth, the tiny loops move independently of one another creating millions of little buffers. The results are a clean, thoroughly polished surface.
Detail your way with the Pinnacle XMT Light Swirl Remover Intro Kit. It contains all the products you need to restore your vehicle’s finish by hand.
Use the products as follows:
- Apply a quarter-size amount of Pinnacle XMT Fine Swirl Remover #2 or XMT Ultra Fine Swirl Remover #1 to the orange side of the Polish ‘N Wax Applicator. Work the swirl remover into the paint one small section at a time. Use an overlapping, figure eight motion to ensure good coverage.
- Once the swirl remover dries to a haze, buff away the residue with the Cobra Microfiber Towel. Repeat these steps until you’ve polished the entire vehicle.
- Apply a quarter size amount of XMT Carnauba Finishing Glaze to the gray side of the Polish ‘N Wax Applicator. Spread the glaze in a thin, even coat over one section at a time.
- After the glaze dries, buff off the haze with the second Cobra Microfiber Towel.
- For longer lasting protection, follow up with your favorite Pinnacle Wax.
A total retail value of $76.60, you save $26.65!
|
|
