  Snow is in the forecast!
The old bucket and hose wash method just isn't for you. You're looking for something fast, effective, and more fun. You're looking for the Pinnacle Tornador Air Foamer HP.
The Pinnacle Tornador Air Foamer HP Foam Gun will change how you wash your car. The "Snow Gun" uses the air pressure from an air compressor to convert shampoo or any foamy product into unbelievable foam. The suds are so light and fluffy, they cling to vertical surfaces without running off.
When washing your vehicle, do you feel you don’t have adequate lubrication or cleaning power because the suds run off the paint? You’ll never experience that with the Pinnacle Tornador Air Foamer HP Foam Gun. The "Snow Gun" allows you to presoak the vehicle with clinging foam. The foam stays where it’s sprayed. As you wash the vehicle, there is a layer of light foam between your mitt and the paint. With the Tornador “Snow Gun” your shampoo foam won’t fall flat.
The Pinnacle Tornador Air Foamer HP Foam Gun only works with an air compressor capable of producing 60-90 psi of air pressure. For optimal performance, the Pinnacle Tornador Air Foamer HP works best with an air compressor that produces 5 CFM or more at 90 psi. The higher the air pressure, the greater the foam generated by the Snow Gun. The unique barrel on the "Snow Gun" mixes the shampoo and pressurized air to create a blizzard of foam. The amount of foam is regulated by a pressure valve on the gun. Use as little or as much foam as you need. You’ll be amazed!
The Pinnacle Tornador Air Foamer HP Foam Gun can be used with any foaming cleaner, such as car shampoos, carpet and upholstery cleaners, and non-acidic wheel cleaners. Please note: Thoroughly flush all parts of the foam gun with water between uses to prevent cross-contamination of vehicle surfaces. The best rule of thumb is to use different foam guns for different parts of the vehicle.
Interior shampoos and car wash soaps can be diluted per the manufacturers’ instructions prior to adding them to the Tornador’s reservoir.
The Pinnacle Tornador Air Foamer HP Foam Gun includes the gun itself with the 30 oz. jar and an extra cap for the jar. You will need an air compressor to use the Tornador. To use the Tornador “Snow Gun” Foam Gun for car washing, start by rinsing down the vehicle with a water hose. Mix the desired shampoo with water as directed on the product’s label. Attach the nozzle to the jar tightly and attach the gun to the air compressor. Turn the air compressor i and coat the vehicle with foam. Turn off the air compressor and agitate vehicle with a sponge or mitt. Rinse with your water hose!
To use the Pinnacle Tornador Air Foamer HP Foam Gun for interior carpet and fabric cleaning, dilute a concentrated interior cleaner per the label directions. Spray the carpet and seats with foam and use a brush to agitate the area. Then towel dry and vacuum.
The Pinnacle Tornador Air Foamer HP Foam Gun turns any concentrated, surfactant cleaner into amazing foam that coats and clings to automotive surfaces. This isn’t just a foam gun – it’s a Snow Gun!
30 oz. reservoir
|
|
