Home > Promotion Details > Shop By Brand > Pinnacle Wax > Pinnacle GlassWork Water Spot Remover

Pinnacle GlassWork Water Spot Remover

Pinnacle
Pinnacle Wax
Pinnacle GlassWork Water Spot Remover
Tough enough to tackle water spots, gentle enough not to scratch glass! Pinnacle GlassWork Water Spot Remover removes water spots and road film more effectively than traditional glass cleaners. A clean windshield is essential for a safe driving experience, but even with regular cleaning, water spots and road film build up over time. This layer of film diminishes the effectiveness of your windshield wipers causing a potentially dangerous situation in inclement weather. Pinnacle GlassWork Water Spot Remover removes water spots and impurities when applied by hand or using a machine, and the crystal clear results will keep you and your passengers safe on the road. Ordinary glass cleaners have their place; they remove finger prints, smudges and dust with no issue. The mineral deposits and sticky road film that build up over time require the strength of Pinnacle GlassWork Water Spot Remover for proper removal. Glass-safe abrasives coupled with citrus-based mineral dissolving agents give Pinnacle GlassWork Water Spot Remover the power to safely dissolve and remove water spots and road film from glass without scratching! Pinnacle GlassWork Water Spot Remover leaves glass crystal clear, and allows wipers to glide across the windshield. After using Pinnacle GlassWork Water Spot Remover, rain, snow, sleet and road spray will be cleared from the windshield surface more effectively making your ride safer. Always apply on clean, dry, cool glass out of direct sunlight. To Apply by Hand:
  • Apply a quarter-sized amount of Pinnacle GlassWork Water Spot Remover to a foam or microfiber applicator pad.
  • Using firm pressure and an overlapping, circular motion, apply to a 12” x 12” section of glass.
  • Work the polish until it turns clear.
  • Immediately wipe off any residue with a clean microfiber towel.
  • Repeat on one section at a time until the entire area has been treated.
  • To apply by Machine:
    Pinnacle GlassWork Water Spot Remover can be applied by any machine polisher
  • Tape off any surrounding panels to minimize splatter.
  • Apply a quarter-sized amount to a light-cutting or polishing foam pad.
  • Set the machine to a medium or high setting and, using overlapping passes, work the product over a section of glass until the product begins to turn clear.
  • If you notice more water spots, add more product and rework the section.
  • Immediately wipe off any residue with a clean microfiber towel.
  • Repeat on one section at a time until the entire area has been treated.
  • 16 oz.

    http://www.superiorcarcare.net/pinnacle-glasswork-water-spot-remover.html
    $19.95
    Pinnacle GlassWork Water Spot Remover
    Click to Enlarge
    Item #PIN-830
    AvailabilityUsually ships the same business day
    Rating
    List Price$19.95
    Quantity:

    Product Reviews for Pinnacle GlassWork Water Spot Remover

    Product Description

    Tough enough to tackle water spots, gentle enough not to scratch glass!

    Pinnacle GlassWork Water Spot Remover removes water spots and road film more effectively than traditional glass cleaners. A clean windshield is essential for a safe driving experience, but even with regular cleaning, water spots and road film build up over time. This layer of film diminishes the effectiveness of your windshield wipers causing a potentially dangerous situation in inclement weather. Pinnacle GlassWork Water Spot Remover removes water spots and impurities when applied by hand or using a machine, and the crystal clear results will keep you and your passengers safe on the road.

    Ordinary glass cleaners have their place; they remove finger prints, smudges and dust with no issue. The mineral deposits and sticky road film that build up over time require the strength of Pinnacle GlassWork Water Spot Remover for proper removal. Glass-safe abrasives coupled with citrus-based mineral dissolving agents give Pinnacle GlassWork Water Spot Remover the power to safely dissolve and remove water spots and road film from glass without scratching! Pinnacle GlassWork Water Spot Remover leaves glass crystal clear, and allows wipers to glide across the windshield. After using Pinnacle GlassWork Water Spot Remover, rain, snow, sleet and road spray will be cleared from the windshield surface more effectively making your ride safer.

    Always apply on clean, dry, cool glass out of direct sunlight.

    To Apply by Hand:
  • Apply a quarter-sized amount of Pinnacle GlassWork Water Spot Remover to a foam or microfiber applicator pad.
  • Using firm pressure and an overlapping, circular motion, apply to a 12” x 12” section of glass.
  • Work the polish until it turns clear.
  • Immediately wipe off any residue with a clean microfiber towel.
  • Repeat on one section at a time until the entire area has been treated.


  • To apply by Machine:
    Pinnacle GlassWork Water Spot Remover can be applied by any machine polisher
  • Tape off any surrounding panels to minimize splatter.
  • Apply a quarter-sized amount to a light-cutting or polishing foam pad.
  • Set the machine to a medium or high setting and, using overlapping passes, work the product over a section of glass until the product begins to turn clear.
  • If you notice more water spots, add more product and rework the section.
  • Immediately wipe off any residue with a clean microfiber towel.
  • Repeat on one section at a time until the entire area has been treated.


  • 16 oz.