| || |
|Nanoskin AutoScrub Fine Grade Wash Mitt|
Decontaminate paint with your wash mitt!
The Nanoskin AutoScrub Wash Mitt is the fast and convenient way to rid your vehicle of above-surface contaminants. The Nanoskin AutoScrub Wash Mitt consists of a durable microfiber wash mitt coated on one side with a high-tech rubber polymer coating that safely removes above-surface contaminants—including rail dust, paint overspray, tar, and bug remains—faster and more effectively than traditional clay bars can. The best part is, it does all this as you wash your vehicle! The Nanoskin AutoScrub Wash Mitt is a cost-effective way for professional detailers and enthusiasts to remove contamination prior to polishing or waxing.
It’s no secret: crisp, glossy reflections are impossible to achieve if the surface has not been properly prepped and decontaminated. Without a perfectly clean surface, your wax or sealant just won’t bond properly. Up until recently, the only option in above-surface paint decontamination was the traditional clay bar. That is until Nanoskin came up with the revolutionary Nanoskin AutoScrub Wash Mitt.
Detailing clay is a valid way to remove contamination, but there are some drawbacks: The process is time consuming and if you drop the clay it has to be thrown away to avoid inflicting scratches from contaminants on the ground which can make the process rather costly. With the Nanoskin AutoScrub Wash Mitt however, if you drop it on the ground, you can simply rinse it off and continue working! The Nanoskin AutoScrub Wash MittNanoskin AutoScrub Wash Mitt removes above-surface contaminants faster more effectively than traditional clay bars can, allowing you to move on to more enjoyable car-detailing tasks.
Although the Nanoskin AutoScrub System was designed with professional detailers in mind, it’s so easy to use that even a novice can achieve optimal results. So if you want perfectly prepped paint no matter your skill level, the Nanoskin AutoScrub Wash Mitt is for you! The Nanoskin AutoScrub Wash Mitt is ideal for use on well-maintained vehicles with light to moderate imperfections.
Directions for use:
Use on clean, cool surfaces
Mix one ounce Nanoskin Bubble Bath Wash & Shine Shampoo per one gallon of water.
Flush away loose dirt with water
Wash and rinse one section at a time using light pressure with the Autoscrub Wash Mitt
Start at the roof of the vehicle, working down section by section to the hood, trunk, and side panels
Rinse with clean water
Dry he vehicle using a high-quality waffle weave towel such as the Waffle Weave Guzzler Drying Towel
Note: This is the FINE GRADE Autoscrub Wash Mitt designed for use on vehicles with light to moderate contamination. For smooth, glossy paint, follow decontamination with the application of a fine polish such as BLACKFIRE Scratch Resistant Clear Finishing Polish using your DA polisher and a polishing pad.
Call Toll-Free 1-800-215-4460 to speak to a Customer Service Representative or email us