  The same polishes used by paint repair technicians!
The Menzerna Intensive Shine Kit is for moderate swirl removal and shine enhancement. The Menzerna polishes included in this kit are the same polishes used by paint repair technicians to remove imperfections on newly cured paint to create a new car shine.
Intensive Polish removes 2000 grit sanding scratches, swirls, and scratches on old and new paint finishes. Final Polish removes 2500 grit sanding scratches and light swirls on fresh paints and on vehicles prepolished with Intensive Polish. This two part system will create a gorgeous gloss on all types of paint!
The Menzerna Intensive Shine Kit includes:
32 oz. Menzerna Final Polish
32 oz. Menzerna Intensive Polish
2 – 8 oz. Bottles with Caps
2 Cobra Indigo Edgeless Microfiber Polishing Cloths, 16 x 16 inches
4 Cobra 6 Inch Microfiber Bonnets
1 CCS 6.5 Inch White Polishing Pad
1 CCS 6.5 Inch Gray Finishing Pad
32 oz. Menzerna Intensive Polish
Menzerna Intensive Polish defies convention! Intensive Polish is capable of removing 2000 grit sanding scratches, oxidation, compounding swirls and other defects without hazing. Based on its abilities you’d think it’s a compound but, in fact, Menzerna Intensive Polish is just what the name says – a polish on steroids! Use Intensive Polish before Final Polish.
32 oz. Menzerna Final Polish
Menzerna Final Polish is a pure polish with no glaze, fillers, or silicones. The water-based formula contains no solvent. It is safe on fresh OEM coatings and new repair coatings. Menzerna Final Polish will not create new swirls or leave haze, and it creates no dust. It leaves only a high gloss finish on all colors and types of paint, with or without a clear coat. This is called Final Polish but it’s an ideal first polish for newer vehicles that only have very fine swirls. The abrasives are extremely finely milled to prevent the creation of new swirls. Even on black paint, Menzerna Final Polish will produce an outstanding shine without a trace of micro marring.
2 – 8 oz. Squeeze Bottles with Caps
Fill these high density polypropylene bottles with 8 ounces of each Menzerna polish for easier handling while you work. These small squeeze bottles have a flip top cap so you can easily flip the cap open with one hand and apply more polish to the pad. For mobile detailers, these lightweight bottles allow you to bring only what you need for the job and leave the large bottles at home.
2 Cobra Indigo Edgeless Microfiber Polishing Cloths
Super soft and absorbent, these 70/30 towels are perfect for buffing off waxes, polishes or sealants. Tiny looped fibers polish your paint to a beautiful shine while the woven core absorbs an incredible amount of fluid. These towels have an amazing "grip" to remove even the most stubborn wax residues. Edgeless construction eliminates the risk of micro-marring.
CCS 6.5 Inch White Polishing Foam Pad
The white polishing pad features dense foam for the application of cleaner waxes and micro fine polishes. This pad has very light cutting power so it’s perfect for pre-wax cleaners.
CCS Gray 6.5 Inch Finishing Foam Pad
Composition is firm enough to withstand added pressure during final finishing to remove buffer swirls. The gray finishing pad has no cut and will apply thin, even coats of waxes, sealants, and glazes.
4 Cobra 6 Inch Microfiber Bonnets
These six-inch Cobra microfiber bonnets are well-made, reversible, and machine washable. With a 70/30 blend, they are super soft and gentle on all paint finishes. Cover your foam pad directly or layer them over the lamb’s wool leveling pad for a more cushioned application. Either way, they are superior at applying products, polishing and shining automotive paint.
The Menzerna Intensive Shine Kit will restore older, weathered paint finishes or new repair coatings using Menzerna’s finely milled abrasive technology. The polishes create no dust or marring of the paint. In fact, you can go straight from Intensive Polish to finishing on most light colored vehicles. Use Final Polish to restore optimum gloss to dark paints or as a finishing polish any time the paint needs a boost in gloss.
Application:
Work out of direct sunlight on a clean, dry vehicle.
- Put the white pad onto your Porter Cable 7424. Apply an X of Menzerna Intensive Polish across the pad. With the polisher turned off, spread the polish on a 2 x 2 sq. ft. section of paint. Note: Using the white pad with Intensive Polish will remove light to moderate imperfections. If you have more pronounced swirls, use an orange light cutting pad.
- Turn the polisher on between 5 and 6 and work the polish into the paint in a side to side, overlapping motion. When the polish begins to dry, turn the polisher off and lift it off the paint.
- Use one of the included Cobra Indigo Edgeless Microfiber Polishing Cloths to wipe away the residue. You can also use a bonnet but you must place the bonnet over a lambswool pad (not included) to provide a cushion between the backing plate and the bonnet.
- Remove the white pad and put on the gray pad. The gray foam has no cut so using it with Final Polish will give the paint a light, shine-enhancing polishing.
- Apply an X of Menzerna Final Polish across the gray pad. With the polisher turned off, spread the polish on a 2 x 2 sq. ft. section of paint.
- Turn the polisher on between 4 and 5 and work the polish into the paint in a side to side, overlapping motion. When the polish begins to dry, turn the polisher off and lift it off the paint.
- Use one of the included Cobra Indigo Edgeless Microfiber Polishing Cloths to wipe away the residue. You can also use a bonnet but you must place the bonnet over a lambswool pad (not included) to provide a cushion between the backing plate and the bonnet.
- Always apply a wax or sealant after polishing.
Purchased separately, these items total $125.60. Save $25.65!
|
|
