| || |
|Menzerna Final Polish 128 oz.|
|Used by Mercedes Benz of Germany!|
Menzerna Final Polish can be used after compounding or before waxing to remove old wax and minor spider webbing, and to create a clean, smooth, reflective surface in preparation for a coat of wax. The fine polish contains no wax, glaze, fillers, or silicones. It is a pure polish that genuinely improves the paint surface, rather than masking it, so the wax has the smoothest possible surface underneath it. As any detailer knows, the wax is only as good as the paint underneath it.
What Final Polish does contain are micro-fine, precision milled mineral abrasives. The water-based formula is safe for fresh paint or factory cured paint without a clear coat. It contains no solvent cleaners and it will not produce swirls. After compounding, the polish will restore the surface gloss and remove any haze created by the compound. On a like-new paint finish, it will correct minor surface imperfections to create a smooth, swirl-free finish. Black and red vehicles will really benefit from Menzerna Final Polish.
For best results, apply Menzerna Final Polish with a dual action or circular polisher. It can also be applied by hand, but you will not receive the full swirl-correcting benefits. Work out of direct sunlight. If using a dual action polisher, like the Porter Cable 7424XP, or a circular polisher, use a white polishing pad. Set a dual action at a speed of 4000 OPM. On a circular polisher, work at a speed of 1000 RPM. Work in sections and check your results often by wiping away the haze with a damp microfiber towel.
Menzerna Final Polish will remove existing wax. Follow up with a fresh coat of wax or sealant after polishing.
Made in Germany.
Call Toll-Free 1-800-215-4460 to speak to a Customer Service Representative or email us