  Clean and wax in one easy step!
Some boat dealers suggest that fiberglass boats are maintenance-free, but read the manufacturer information. Most boat and personal water craft manufacturers, if not all of them, recommend regular washing, polishing, and waxing to maintain the fiberglass hull. Otherwise, microscopic contaminants will penetrate the gel coat and cause oxidation.
Oxidation is possible on fiberglass because the gel coat layer is similar to your car’s clear coat. The gel coat is a thin, protective layer that sits above the color coat on the fiberglass. It is unlike a clear coat in composition, but it functions the same way. The gel coat contains millions of pores that can allow microscopic debris to penetrate to the fiberglass. Regularly removing these contaminants will keep the gel coat, and therefore the fiberglass, clean and clear.
Meguiar’s #50 Marine/RV Cleaner Wax combines two steps of the boat care process. You can remove light contamination from the gel coat and add a layer of durable protection at the same time. You spend less time detailing and more time enjoying your boat. It also makes quick work of your RV so you have one less thing to worry about as you travel.
Meguiar’s #50 Marine/RV Cleaner Wax contains chemical cleaners that remove contamination, light oxidation, haze, and minor swirls and scratches. As it perfects the surface of the fiberglass, it leaves a layer of anti-corrosive ingredients that will protect your boat or RV from salt air, UV rays, and corrosion. Used regularly, fiberglass surfaces will appear clean, bright, and shiny!
The wax contained in Meguiar’s #50 Cleaner Wax is a premium gloss-enhancing protectant. Your boat or RV will have a high gloss that makes colors appear more vibrant. The slick shine will prevent corrosive elements from entering the gel coat in order to prevent the chalky effect of oxidation.
To apply Meguiar’s #50 Marine/RV Cleaner Wax, wash and dry your boat or RV first. Apply #50 to a foam applicator pad and rub onto one section of fiberglass at a time. When it dries to a haze, buff off the residue with a microfiber towel. Continue until you’ve buffed your entire boat or RV to a bright gloss.
You will find it easiest to use a polisher like the Porter Cable 7424XP to detail your boat or RV efficiently. Use a finishing pad to apply #50, working in small sections at a low speed. Keep more than one pad on hand so you can change pads as needed. Mix a solution of DP Polishing Pad Rejuvenator and water in a 5 gallon bucket and toss used pads in the bucket as you work. When you add one pad, remove and rinse another so you always have a clean pad to work with. You may also use DP Polishing Pad Rejuvenator to wash your microfiber towels and tools. Check out our Buffers, Polishers, and Pads section for all the pads and tools you need to bring out the shine in your boat or RV.
Cut your detailing time in half with Meguiar’s #50 Marine/RV Cleaner Wax! You’ll get the glossy shine of a premium wax and the cleaning properties of a fine polish in one easy step.
|
|
