| || |
|Marine 31 Gel Coat Heavy-Cut Cleaner Wax 64 oz.|
The most effective boat cleaner wax you will ever use!
Marine 31 Gel Coat Heavy-Cut Cleaner Wax removes moderate to heavy oxidation and staining on both standard and painted gel coat surfaces while adding a durable layer of wax protection. This advanced formula contains micro-abrasives that work hand in hand with cleaning agents and nourishing oils that clean and protect without dusting or caking.
Typical cleaner waxes contain sharp abrasives that effectively remove oxidation and staining, but leave unsightly swirls and hazing. Marine 31 Gel Coat Heavy-Cut Cleaner Wax contains micro-abrasives and nourishing oils to provide hydration to dry, chalky gel coat. The wax in the formula protects gel coat against the harsh environmental elements like salt and UV rays that plague boats daily.
Polishing and waxing a boat can take hours. Just think about all that time spent on maintenance that could be time spent on the water. Marine 31 Gel Coat Heavy-Cut Cleaner Wax makes that dream a reality with its simple one-step formula. Marine 31 Gel Coat Heavy-Cut Cleaner Wax removes unsightly oxidation and staining and leaves a durable layer of wax protection behind.
Gel coat is extremely durable, but oxidation is simply a fact of gel coat life. With the extreme UV and salt exposure that boats face, there is no way to avoid it. An oxidized gel coat will look dull and chalky instead of showroom glossy. Unless your boat is new, a wax alone will not be enough to bring back the shine. With one easy step Marine 31 Gel Coat Heavy-Cut Cleaner Wax can help you turn back the clock. Nourishing oils and micro-abrasives work in unison to smooth and hydrate the surface, leaving a silky surface guarded by a layer of protection. Advanced UVA and UVB absorbers protect your boat longer than other products can.
As with all Marine 31 products, Marine 31 All-In-One Gel Coat Polish & Wax is eco-friendly and harbor safe.
Directions for use:
- Shake product well prior to use. Always work on a cool, clean surface.
- Attach a foam cutting pad to your dual-action or rotary polisher. Pour product directly onto the pad in the shape of an “X.” Spread product over a 2’ by 2’ section.
- For a dual-action/random orbital polisher, set the speed between 5000 and 6000 OPM. For a circular/rotary polisher, set the speed between 1200 and 1500 RPM.
- Work the product until it turns clear.
- Remove any residue with a clean, soft microfiber towel.
Made in the USA
Call Toll-Free 1-800-215-4460 to speak to a Customer Service Representative or email us