| | Home > Car Buffers, Car Polishers & Pads > Professional Circular Polishers & Accessories > Professional Polishers Backing Plates > Rotary 3 ¾ inch Backing Plate
| | Rotary 3 ¾ inch Backing Plate |  |  Prevent cookie-cutting with a balanced, level backing plate just for rotary polishers!
A quality backing plate makes all the difference when you’re polishing your vehicle with a rotary buffer. Rotary polishers, also known as circular or professional polishers, generate a lot of heat due to the rapid spinning action of the head. Some heat is normal, but too much can burn your paint. To prevent some common polishing mistakes, get the 3 ¾ Inch Professional Polisher Flexible Backing Plate.
This is the same type of plate used by the Mercedes-Benz and BMW plants in Germany. It’s widely considered to be the best rotary backing plate you can buy, and you’ll see why. The molded urethane construction allows the plate to bend at the edges to contour to the curves of your vehicle. When you tilt the polisher, the plate will bend to prevent accidental bumps with a blunt edge, which can result in cookie-cutting (crescent-shaped marks in your paint). The urethane is also great at absorbing a lot of the heat generated by the polisher. If the heat is not transferred to the paint, the chances of burning are very minimal.
Steel struts are molded into the core of the urethane to balance the pad as it spins. The edges are beveled to eliminate the risk of the plate hitting the paint. The plated steel threaded insert accommodates any 5/8” diameter shaft.
The 3 ¾ Inch Flexible Plate features Velcro® brand fasteners molded into the urethane to prevent separation problems. Change pads easily by pulling one off and pressing another one in its place. Use 5 or 5 ½ inch pads with this plate.
Use the backing plate preferred by top German automakers. The 3 ¾ Inch Professional Polisher Flexible Backing Plate will reduce heat transfer and wobbling for a safe, even polish every time.
|
|
|
| | | | Need Assistance?
Call Toll-Free 1-800-215-4460 to speak to a Customer Service Representative or email us
|
| |
