| || |
|Grit Guard Universal Pad Washer|
Clean all types of pads on all types of polishers!
Until now, pad washers were only made for rotary (circular) polishers. Manufacturers were puzzled at how to make a pad washer for an orbital polisher. Grit Guard solved the puzzle with the Grit Guard Universal Pad Washer! This is the first pad washer to work with any type of polisher: rotary, dual action, and even dual headed!
The Grit Guard Universal Pad Washer eliminates hand scrubbing and soaking soiled buffing pads. While the pad is still on the polisher, just insert it into the pad washer and run the polisher for several seconds. That’s it! The motion of the polisher agitates the pad against the Grit Guard Insert inside the pad washer. The Grit Guard Insert removes car care products and restores the texture of the pads, and your hands stay clean!
Grit Guard Universal Pad Washer works with all polishers! Use your Porter Cable 7424XP, Makita, DeWalt, and your Cyclo. The pad washer’s opening is adjustable to accommodate orbital and rotary machines. Plus, the Grit Guard Universal Pad Washer washes all types of pads and polishing balls. Clean and restore foam and wool in just seconds!
The Grit Guard Universal Pad Washer includes the pad washer complete with Splash Guard, the Grit Guard Extension, a Gamma-Seal Lid, and a 4 oz. spray bottle of Pad Renewing Solution.
The Grit Guard Extension locks into place at various points around the Girt Guard Insert. This small grid piece allows you to provide more agitation on heavily soiled areas of the pad. Position the Grit Guard Extension in the middle of the grid to clean the center of the pad. Position the extension off-centered to clean the outer edge of the pad.
The Gamma-Seal Lid allows you to seal the Grit Guard bucket in order to keep dust out, or to store water or pad cleaning fluid for later use. The Gamma-Seal Lid forms a water-tight seal so you can transport the pad washer without spilling its contents.
The Grit Guard Pad Renewing Solution works with all types of foam and wool pads and polishing balls. Before using the Grit Guard Universal Pad Washer, spray the pad with 4-5 spritzes of Pad Renewing Solution. It will help break up oily residues inside the pad as you operate the pad washer.
When you’re ready to clean a pad, simply position the pad against the Grit Guard Insert inside the pad washer. Close the Splash Guard. Turn the polisher on at its lowest speed. Move the pad around inside the pad washer to clean all parts of the pad. Run the polisher for 20-40 seconds. Then lift the pad out of the water and continue running the machine to dry out the pad. Keep the Splash Guard closed until you’ve turned the polisher off.
Try this advanced drying technique: Remove the Grit Guard Extension from the grid and place it where the Splash Guard lid says “Dry Pad Here”. Operate the polisher while pressing lightly against the Extension in order to dry pads faster.
The Grit Guard Universal Pad Washer is the fastest and easiest way to clean all buffing pads! Use the power of the polisher to do the scrubbing for you. The Grit Guard Universal Pad Washer is the first pad washer to work with any and all polishers and all buffing pads.
For the best results: Fill the pad washer as directed. Keep the Splash Guard closed while operating the polisher. Keep the pad’s hook & loop backing out of the water to avoid getting the adhesive wet.
Please call 1-800-215-4460 for a Next Day, 2 Day or
3 Day shipping quote on this item.
Call Toll-Free 1-800-215-4460 to speak to a Customer Service Representative or email us