  Spot Buffs are small 4” pads that attach directly to your circular polisher, or to your dual-action using an adapter. They even attach to your electric drill! The smaller polishing surface means you’re only attacking the blemish, not the surrounding paint. Scratches and oxidation often occur in particular spots on your vehicle. Rarely is your whole vehicle covered in blemishes. If the majority of your vehicle looks like new, there’s no need to compound the whole thing. In fact you might cause swirls if you use an overly abrasive pad on perfectly good paint. With Spot Buffs, you are only addressing the problem, not creating new ones.
With Spot Buffs, you do not need a polisher to address scratches and swirls. A special drill adapter screws into your drill and your 2 ¾” backing plate. The plate has Velcro® for quick pad changes, just like standard backing plates. Spot Buffs are recommended for 12 or 18V electric and cordless drills with an output no greater than 3000 rpm. Because those rpm’s are concentrated into such a small surface, too many rpm’s will increase the risk of burning paint. On a low speed, this is extremely unlikely.
The gray foam's composition is firm enough to withstand added pressure during final finishing to remove buffer swirls, but it is gentle enough to apply a thin, even coat of wax without introducing swirls. Use with machine glaze or finishing polish.
|
|
