  Wavy foam pads are safer for your vehicle!
Rotary polishers produce more heat during operation than dual action polishers. That’s why rotary (or circular) polishers are generally reserved for professional detailers or hobbyists with years of experience. The risk of burning the paint is considerably higher with a rotary.
If there was any way to reduce the risk of burning, even just a little, you’d try it, right? Well, get ready to update your pad collection! The Edge 2000 Wave 8 inch Foam Pads have a wavy surface that allows better air circulation between the pad and the paint. This ventilation can reduce heat build-up, which is the primary cause of paint burning.
The wavy texture looks unusual but it offers more protection to your vehicle during the compounding process. It’s no substitute for smart polishing practices so take all the usual precautions when using a rotary polisher.
Even with a reticulated surface, The Edge 2000 Wave 8 inch Foam Pads offer excellent surface contact because the pad has multiple raised “waves”. As the pad spins on the machine, these waves cover the same surface area as a flat pad. You can expect the same fantastic results you’d get from the flat Edge pads.
The Edge 2000 Wave Pads also offer the convenience and ingenious design of the original Edge pads. Each pad is double-sided to give you twice the surface area per pad than a standard one-sided, hook & loop pad. When one side becomes soiled, flip the pad and keep polishing!
Plus, The Edge 2000 Wave Pads use the same Quick Connect Adapter. If you already have one, there’s no need to buy another one. This adapter works with any circular polisher with a 5/8 inch threaded post. Screw the adapter in place and pop a pad on. To release the pad, push the button located on the end of the adapter. It’s that easy!
The Quick Connect System keeps each pad perfectly balanced and centered. Plus, each pad has a beveled edge to give you better maneuverability around curves and corners.
The Edge 2000 Wave 8 inch Foam Pads are available in these varieties:
The Edge Yellow Cutting Pad
The yellow pad is a heavy-cut pad used for heavy oxidation and severe swirls and imperfections. It works wonders on older vehicles with neglected paint. Use it to apply a swirl remover or a polishing compound to blend away more severe imperfections. This dense pad has 40 pores per inch.
The Edge Green Medium Cutting Pad
The green pad is a medium-cut pad intended for removing light oxidation and moderate swirls and imperfections. This versatile pad works well with swirl removers and is clear coat safe. This pad has 50 pores per inch.
The Edge Blue Finishing Pad
The blue pad is an everyday, nonabrasive pad for product application. It will apply pre-wax cleaner or wax in a thin coat without abrading the clear coat. Your paint will appear smooth and uniform. This softer pad has 70 pores per inch.
The Edge White Ultrafine Finishing Pad
The white pad is ultra smooth and ultra soft. The white pad leaves a bold, crystalline gloss on new and just-detailed vehicles. Apply waxes, sealants, and glazes with the white pad.
The Edge Red LSP Finishing Pad
The red pad is softer than the white pad, which makes it perfect for new car finishes. Apply last step products, like waxes, sealants and glazes without fear of abrasion. The red pad also makes layering products easier. Apply multiple coats of your favorite wax or sealant with the red lsp foam pad.
We recommend The Edge 2000 Wave 8 inch Foam Pads for a rotary/circular polisher, such as the Makita 9227C. You will need the Quick Connect Adapter (E-206) to connect these pads to your polisher. No backing plate is needed.
Experience the added protection of superior air circulation as you polish. The Edge 2000 Wave 8 inch Foam Pads decreases the risk of machine polishing by decreasing the heat. The one thing you won’t see a reduction in is smooth, shiny paint!
|
