Make sure your coating, wax, or sealant bonds correctly by properly prepping the surface.Detailer's Coating Prep Polish
is a non-abrasive polish designed to properly prep your vehicle’s surface prior to application of a coating, sealant, or wax. This unique formula deep cleans automotive paint, removing below-surface contaminants that would otherwise prevent proper bonding of your favorite coating, sealant, or wax. Detailer's Coating Prep Polish
is free of silicones, polymers, waxes, sealants, and other fillers allowing you to create a surface that is perfectly clean and ready for your favorite coating.
Traditionally, after polishing your vehicle, but prior to applying a coating, it was necessary to first strip the paint using isopropyl alcohol or chemical wax and oil removers. Detailer's Coating Prep Polish
puts an end to that extra, intermediary paint stripping step. This unique polish does not contain any oils, waxes, silicones, polymers or other nonessential fillers. This truly is the perfect polish for use prior to application of a permanent or semi-permanent paint coating!
In recent years, paint coatings have come to the forefront of the detailing trade. While traditional polishes work great at correcting defects and leaving a smooth, glossy surface behind, many contain fillers to aid in that glossy slickness. New waxes, sealants, and coatings require a perfectly clean surface in order to establish a proper bond, and Detailer's Coating Prep Polish
provides that surface. Detailer's Coating Prep Polish will remove all unwanted contaminants while preparing the surface for a perfect bond with the coating of your choice.Detailer's Coating Prep Polish
is safe for all paint systems and is completely non-abrasive. This polish is designed to work on light and dark colored vehicles, leaving them clean, glossy, and ready for protection. Detailer's Coating Prep Polish
is capable of removing water spots, light surface stains, and road film without leaving anything behind. This easy-to-use formula can be applied by hand or using a machine polisher.Directions For Use:
- Always work on a surface that is cool to the touch and out of direct sunlight.
- When applying by hand, use a dime-sized amount of product on a foam pad or terrycloth towel; work product into surface and wipe away residue with a clean, dry microfiber cloth.
- When applying with a machine, apply a nickel-sized amount to the foam polishing pad and work the product over the surface using a medium speed setting; wipe away residue using a clean, dry microfiber towel.
Forget that IPA wipedown and prepare your paint for a coating using Detailer's Coating Prep Polish.
Made in the USA