Ultrasonic bonding technology creates superior protection for your vehicle.
Some climates are wet much of the time, but rarely experience severe weather. Hawaii is a great example: it rains daily during the winter months, but the climate is otherwise temperate. This kind of weather calls for a car cover with superior water resistance but less density because the cover needs to be easy to handle for everyday use. The NOAH
cover is just the cover for hot, wet weather that is otherwise mild.
Kimberly Clark has created NOAH
, using the newest, state-of-the-art production technology. Three high-tech materials are ultrasonically bonded to make a tough, but surprisingly light car cover.
The protective outer layer is a bi-component created for strength and softness.
A silver-gray color was selected for its heat-resistant properties. The fabric is also treated with UV inhibitors
for extended outdoor use. The middle layer is micro-porous breathable film with holes that are smaller than droplets of water or dust, yet large enough to allow moisture vapor to escape. The NOAH cover is 99% water resistant – the most water resistant cover you can buy!
The soft, paint-protecting inner layer is also a bi-component fabric combination resulting in exceptionally high strength-to-weight ratio with the "soft touch" necessary for today's water-based paints. The fabric weighs only 4.45 oz./sq. yd., so it's easy to handle and fold.
cover is backed by a 4 year warranty by Covercraft
. All NOAH
covers are custom made to fit your vehicle in the heat resistant silver-gray color.
We’re not all fortunate enough to live in Hawaii, but the NOAH
cover is perfect for any climate that receives a lot of rainfall, but is otherwise mild. The advanced fabric technology makes it the most water resistant car cover you can buy!
Covercraft began as a two-person operation in California in 1965, making custom car covers. Today, Covercraft employs over 400 people and their catalogue of custom patterns has grown to over 55,000. Using technologically advanced fabrics from Sunbrella and Kimberly Clark, plus many traditional fabrics, Covercraft continues to produce the highest quality car covers on the market. You can expect Covercraftsmanship in every Covercraft car cover!If it has wheels, Covercraft can cover it!
Protective Outer Layers - A bi-component spunbond, using sheath-core technology. The inner core is polypropylene for strength, with a polyethylene wrap for softness.
Micro-Porous Middle Layer - The barrier layer is breathable film, a proprietary stretch-film technology developed exclusively for Kimberly-Clark. The film is stretched and subjected to a chemical process that creates microscopic holes smaller than droplets of water or dust, yet large enough to allow moisture vapor to escape.
Soft, Paint-Protecting Inner Layer - A bi-component fabric made with polyethylene and nylon. This combination results in an exceptionally high strength-to-weight ratio, with the "soft touch" necessary for today's water-based paint finishes.
Double stitched overlapped seams
Neoprene elastic hems – the elastic in the front and rear hems helps hold the cover in place
Reinforced, non-scratch grommets – use a tie-down rope (supplied) or a vinyl coated cable and lock (optional)
Antenna openings – All Covercraft covers are made to fit vehicles with retractable antennas. If your vehicle does not have a retractable or removable antenna, you will need to cut a small opening in the fabric. Call us at 1-800-215-4460 and we will include an antenna grommet with your cover at no extra charge.
Mirror pockets – Patterns for vehicles manufactured before 1965 may not include mirror pockets. In some cases, the cover will fit over the mirrors without pockets. If you need mirror pockets, they can be included but they will not be sewn into the cover. Call us for details. This applies to some pre-1965 models only.
Cleaning Instructions - For general cleaning, spray off the cover with the water hose while it is on the vehicle. Allow it to air dry. To spot clean stains, spray the spot with Simple Green All Purpose Cleaner. Agitate the spot lightly with a sponge and rinse.
To wash the entire cover, put the cover in a large commercial washer without an agitator. Pour a ¼ cup of Simple Green into the washer and allow it to fill. Then put the cover in. Run the cover through two rinse cycles to be sure all the cleaner is removed. Air dry.
You may also clean the inside of the cover by turning it inside out on the vehicle. Mix one ounce of Simple Green per quart of warm water and spray it onto the cover. Rinse thoroughly until no suds are visible. Air dry.
For added security, add the Car Cover Lock & Cable to your purchase. The cable is vinyl-coated so as to thread through the grommets without scratching.
When you are not using the cover, fold it up and tuck it away in the Car Cover Bag , available at the bottom of the page.
Please allow 3-4 weeks for delivery. This item ships directly from the manufacturer, via ground service only. Expedited & International shipping is not available.
Custom covers start at $159.95
Click Here to Find a Custom Cover For Your Car or Truck