| || |
|CarPro Iron X Paste 500 g.|
|Perfect for vertical surfaces!|
CarPro Iron X Paste is an acid-free, pH-balanced iron remover that will remove contaminates from auto paint and wheels. Iron X Paste has an exceptionally long linger time so that the product works as long as needed to remove iron and brake dust spots. You will find that Iron X Paste will prevent the spread of iron-related damage to protect your vehicle from paint system failure.
Enthusiasts and professionals alike know that airborne chemical compounds and ferrous (iron-containing) particles can seep into automotive paintwork and create corrosive compounds that can erode the paint's sub-layers. We all know that detailing clay can remove the particles that adhere, but will not remove the effects - corrosion may already be under the paint's surface.
We have found that the only way to remove ferrous particles that are embedded is with a dedicated iron remover like CarPro Iron X Paste. You will find that Iron X Paste will open up the paint's pores to release iron particles. Once the pores are open Iron X Paste goes to work to neutralize the caustic compounds that have developed as a result of the particle. Now with one simple step, you can eliminate both cause and effect! Make sure to put an immediate end to this damage before it is too late!
Of particular note: Iron X Paste should not be used on chrome, bare metal parts, brake calipers, wheel balancing weights, or SMART paint repairs! Make sure to mask off these areas, and avoid letting Iron X dry on any surface.
You will find that Iron X Paste is a breeze to use! What’s more, is that you can actually you can see Iron X Paste working! The innovative formula turns purple when it comes into contact with sintered iron particles. During this process, the Iron X Paste transforms the iron into a water soluble complex for easy removal. After five minutes of dwell time, simply wipe down the surface and rinse thoroughly. After using Iron X Paste, you can then polish and clay your vehicle as you normal. Make sure to apply a coat of wax or paint sealant after using Iron X Paste.
Professionals and enthusiasts know that proper paint care means cleaning both above and below the surface. CarPro Iron X Paste Iron Remover will remove iron particles and their effects to keep your paintwork clean and healthy.
Recommended application instructions:
1. Make sure to wash the vehicle and or wheels surfaces. Surface must also be a cool temperature.
2. Apply CarPro Iron X Paste to contaminated areas. Simply wait 5 minutes; you will know Iron X is working to erase contaminants by the color change to a purple or red. Then wipe off all Iron X Paste with soft damp sponge. Make sure that none of the product is allowed to dry on any surface!
3. Finally, rinse well or power-wash the whole surface.
4. The vehicle is now prepared for clay.
Call Toll-Free 1-800-215-4460 to speak to a Customer Service Representative or email us