The highest UV protection available for automotive leathers!
BLACKFIRE Leather Conditioner was developed to offer state-of-the-art UV protection plus a breathable moisture barrier that also guards against wear and abrasion. The non-slick, satin finish created by Leather Conditioner complements any leather interior.
Many of the conditioners that claim to put a protective moisture barrier on the leather are not breathable. Because these products were developed a decade or more ago, they contained polymers that were greasy, slippery, shiny or actually sealed the leather's surface (preventing heat dissipation). While effective in some respects, these types of products do not meet all the requirements of leather.
To resist perspiration, salt, skin oil, and lotion stains, BLACKFIRE's chemists selected a co-polymer recently developed by Dow Corning. This co-polymer cross-links with itself to provide a blanket of protection on top of the leather. It blocks moisture yet still allows air flow through the coating to facilitate heat dissipation. This co-polymer is also non-greasy, dries almost on contact to a matte finish and isn't slippery.
For UV protection, BLACKFIRE’s chemist went all the way to Switzerland to CIBA, the maker of TINUVIN 5151. Without getting too deep, TINUVIN 5151 contains both competitive UV absorbers and hindered amine light stabilizers (HALS) to significantly retard photo-oxidative degradation. Both UV absorbers and HALS work together to provide the highest level of UV protection available in a leather dressing!
BLACKFIRE Leather Conditioner is like applying a moisturizing lotion to your leather seats. It is rich and creamy. However, it is not recommended on perforated leathers as it could clog the pores. Do not use on napped leathers such as suede.
Bottom line, if your car, bike, boat or RV has non-perforated leather seating, BLACKFIRE Leather Conditioner is the best conditioner, UV block, and moisture barrier you can use.
- Contains TINUVIN5151 for the highest level of UV protection.
- Maintains the natural moisture balance of leather surfaces.
- Dries to the touch.
- Contains no petroleum solvents.
For best results, thoroughly clean surface first using Blackfire Interior Cleaner. Apply a dime-size amount of product onto a foam or microfiber applicator and thoroughly massage into the leather. Allow lotion to penetrate for several seconds. Then lightly buff with a soft microfiber towel to remove any excess.