| || |
|Blackfire Gloss Enhancing Polish|
Remarkable finishing polish has a built-in glaze for the ultimate "wet-look"!
BLACKFIRE Gloss Enhancing Polish is a non-abrasive polish and glaze combination. It removes old waxes and sealants and it wets the surface to create the illusion of the paint being under water. Polishing is must for a show car shine!
BLACKFIRE Gloss Enhancing Polish helps hide minor swirls and scratches without removing any paint or clear coat. It "rounds-over" the leading edge of minor swirls which robs sunlight of a sharp edge to cause a reflection. While this visually reduces swirls, it does not remove them. This is a great product to use on a vehicle in good condition with very few swirls.
Use Gloss Enhancing Polish to remove old wax, clean the top paint surface, visually reduce swirls and deepen the paint's gloss prior to wax or sealant application.
BLACKFIRE Gloss Enhancing Polish beautifies all colors of any paint with or without a clear coat finish. This polish can be used on single stage or conventional paint, base coat, and clear coat finishes. It can also be used on nano, ceramic-particle clear coats or scratch resistant clear coats, but is not aggressive enough to hide minor swirls and scratches on those finishes.
What this polish does do, in one step, is create the same liquid wetness that would normally require using a separate polish and glaze. A "glaze" is not required with this polish. It is built into the formula.
BLACKFIRE Gloss Enhancing Polish is 100% VOC FREE! This makes the polish safer for your car's paint, safer for your skin and safer for the environment. Gloss Enhancing Polish will not weaken, dry or dull the paint with repeated use.
BLACKFIRE Gloss Enhancing Polish is designed for newer vehicles or vehicles with a "like-new" finish. It is designed for enthusiasts desiring the deepest, wettest gloss. When used under BLACKFIRE Wet Diamond All Finish Paint Protection, it's pure magic! This combination is especially stunning on black, red and dark colors but still shimmers on white, grey and silver finishes.
Removes old wax or sealants.
Hides minor swirls and water spots.
Beautifies all colors.
Prepares paint for wax or sealant.
Hand Application: Work out of direct sunlight. BLACKFIRE Gloss Enhancing Polish can be applied by hand or machine. Shake well before using. Work on one section at a time (example: half a hood, fender, door, etc.). Apply a nickel-size amount to a microfiber or foam applicator. Wipe on using a circular motion until haze starts to form. Immediately remove residue using a soft, dry microfiber towel.
Machine Application: Use a foam polishing pad on your dual action or rotary polisher. Apply four dime-size drops of product onto pad. Use a medium speed (4-5 on a DA polisher or 1,000 RPM on a rotary polisher) to work product into paint using an overlapping motion until haze starts to form. Immediately remove residue using a soft, dry microfiber towel. Work one section at a time.
|64 oz. Blackfire Gloss Enhancing Polish||128 oz. Blackfire Gloss Enhancing Polish|
Call Toll-Free 1-800-215-4460 to speak to a Customer Service Representative or email us