Brass nipple and your choice of pressure washer fitting are included! Use your pressure washer to coat your vehicle in thick foam!
Some foam guns don't have any power behind them, so suds fall flat. With the BLACKFIRE Foam Cannon HP Kit
, the pressure washer delivers a high volume of foam that coats the vehicle quickly. Plus, you get the cleaning power of high-pressure water. Dirt and oils on the vehicle start loosening up immediately, which cuts down on scrubbing.
We all know washing can lead to swirls. Dirt on the vehicle gets rubbed against the paint. By presoaking the vehicle with the BLACKFIRE Foam Cannon HP Kit
, dirt is much easier to remove with less scrubbing required to get the vehicle clean.
For pro detailers in particular, the BLACKFIRE Foam Cannon HP Kit
is a great way to wash customers' cars quickly. A vehicle without a lot of heavy dirt can often be washed using just the cleaning power of the BLACKFIRE Foam Cannon HP Kit
. No extra agitation is needed.
One ounce of a high yield auto shampoo will get you started. If you prefer thicker foam, add more shampoo. Detailer's Pro Series Xtreme Foam Formula
is a great choice for all foam guns. Presoak the vehicle and, if needed, use a soft, clean wash mitt or sponge to gently agitate the foam. Rinse well. The Foam Cannon's reservoir can be removed for rinsing.
The BLACKFIRE Foam Cannon HP
is rated for 5.3 gallons per minute. A brass male nipple is included to connect a pressure washer fitting to the foam gun. One fitting of your choice is included. Choose from six available fittings.
The BLACKFIRE Foam Cannon HP Kit
will turn your pressure washer into a snow machine! Clean up with this high-output foam gun.
Choose the appropriate fitting for your pressure washer in the menu below.
- Rated Pressure: 160 bar - 16 MPa - 2,300 psi
- Permissible Pressure: 180 bar - 18 MPa - 2,600 psi
- Rated Flow Rate: 20 l/min, 5.3 gallons per minute
- Rated Temperature: 60 °C - 140 °F
- Tank: 1 L - 0.264
To figure out which fitting you need, remove the wand from your pressure washer. Look at the fitting you currently have and match it up one of the fittings below.