  Remove deeper swirls, spots & defects in the new scratch-resistant clear coats.
This is a companion product to BLACKFIRE S.R.C. Finishing Polish designed to remove deeper (1500 - 2000 grit) swirls, scratches and defects in ceramic particle and scratch-resistant clear coats. Like S.R.C. Finishing Polish, BLACKFIRE Scratch Resistant Clear Compound is manufactured in Germany by Menzerna, for BLACKFIRE. It is the same compound used at the OEM level by German and domestic automakers.
S.R.C. Compound is designed for machine application with either a dual-action or circular machine polisher. Most 2000 grit and deeper swirls, scratches, spots and defects in ceramic particle and scratch-resistant clear coats can not be removed by hand.
For best results, apply S.R.C. Compound with a circular machine polisher set to 1000 rpm using CCS Technology, Orange Power Pad. These German, orange pads are used at the OEM level on ceramic particle and scratch-resistant clear coats.
S.R.C. Compound is for use on all, newer technology, scratch resistant clear coats. DO NOT use on pre-2005, conventional clear coats. Softer, traditional clear coats should be polished with BLACKFIRE Gloss Enhancing Polish. If you're not sure about your 2005 or 2006 vehicle, check with your dealer to see if it came with a scratch resistant clear coat. If it does have a scratch resistant or nano, ceramic particle clear coat, always use BLACKFIRE S.R.C. Finishing Polish first to try and remove the defect. S.R.C. Compound should only be used to remove deeper scratches and paint defects that S.R.C. Finishing Polish could not remove.
After compounding, the surface may have a dull, hazy finish. This is called compounding haze and is a normal result of compounding. After compounding, use BLACKFIRE S.R.C. Finishing Polish with a clean, Polishing Pad to remove compounding haze and restore surface gloss.
Net weight 32 oz. bottle, made in Germany
|
|
