Get spot repair results that no one will ever spot!
Afraid the repair will be worse than the original scratch? Use 3M Trizact Hookit 6 Inch Foam Discs. They remove P1200-P1500 sanding scratches and prepare the paint to be buffed out with a 3M compound or swirl mark remover.
3M Trizact Hookit 6 Inch Foam Discs are equipped with foam backing that flexes against your vehicle, providing an even finish over curved panels. Pyramid shaped abrasives provide an even sanding pattern. Trizact pyramid abrasives wear down at an even rate. As they do, they expose fresh, sharp abrasives. These abrasives leave an even surface that is easily covered with paint or buffed out.
Use 3M Trizact Hookit 6 Inch Foam Discs with a dual action polisher or random orbit sander. When working on a contoured surface, use the 3M Hookit 6 Inch Soft Interface Pad.
Follow these directions from 3M for the best results. If performing spot repair, follow 3M Trizact Hookit 6 Inch Foam Discs with 3M Perfect-It 6000 Swirl Mark Remover and a 3M Perfect-It Foam Polishing Pad. For large panel repair, 3M recommends using 3M Perfect-It Rubbing Compound (or Extra Cut Rubbing Compound for hard clear coats) after sanding but before using 3M Perfect-It 6000 Swirl Mark Remover. This will ensure an even texture across large panels.
3M Trizact Hookit 6 Inch Foam Discs are a good start to a great spot repair.